ADT® Authorized Dealer Serving Bloomington-Normal & Surrounding Areas
ADT smoke detector in a Bloomington family room
May 24, 2021

Monitored Fire Alarms Vs Smoke Detectors In Bloomington

The National Fire Protection Agency recommends you install a smoke detector.  At a minimum, your house should have a smoke detector in every bedroom, the hallways outside sleeping quarters, and on each story of the structure (don’t forget the basement). However, should you just place a standard smoke detector, or is it better for you to you opt for a more cutting-edge monitored fire alarm? Let's break down the monitored fire alarm vs. smoke detector in Bloomington dispute and discover which tool you ought to use for your loved ones and living space.

Typical Smoke Detectors Only Pick Up Smoke

True to their name, ordinary smoke detectors only go off when they detect an excess of smoke. Then they go off -- usually with a high-volume chirping -- until you reboot the alarm. Of course, that won’t necessarily do any good if everyone’s gone and can’t hear the alert.

Ideally, you need to install multi-sensor smoke detectors that are designed for both smoke from both flaming and smoldering fires. It might be best to pair your detectors so every alarm goes off in unison. That way, you can find out if there's a flame from above, even if it occurs from a mishap in the ground floor.

Monitored Fire Alarms Notify You To Fire And Smoke When You Are At Home Or Away

A monitored fire alarm looks and mounts in a similar way as your standard smoke detector. If they sense fire conditions anywhere in the home, they'll sound a high-pitched warning. However, there's a myriad of functions that your monitored fire alarms are going to do that your smoke detectors cannot.

First off, modern sensors will scan for increasing thermal energy in addition to different kinds of smoke. When they find flames, they'll tell a monitoring team as well as trigger the high-volume alarm. That frees you to concentrate on escaping out of the house while your monitoring center contacts the fire department. And because your monitoring specialist is always alert, your alarms will always notify help even if you’re traveling.

Monitored fire alarms commonly link into your Bloomington home security system. Other devices paired to the same system can be set to activate when your fire alarms spring into action. For example, your linked thermostat can automatically power the ventilation fan, which may help hinder fire growth. Or have your entire home dive into operation and have the lights switch on, your smart locks open, and your security alarms disarms. You can also have your system issue your phone a message to know that your home's in danger while you're out of town.

ADT monitored heat detector in Bloomington 

The Verdict Of Monitored Fire Alarms Vs. Smoke Detectors in Bloomington

It's clear to see what wins in a fair battle between monitored fire alarms and smoke detectors. You just receive so many more tools with a monitored fire alarm.

Ordinary Smoke Detectors:

● Activates high-decibel bell when the device senses excessive amounts of smoke

Monitored Fire Alarms

● Sounds high-decibel alarm when the component detects excessive amounts of smoke

● PLUS can sense increasing heat

● PLUS works with your ADT home security system

● PLUS informs a 24/7 monitoring center which will send emergency responders

● PLUS transmits you a emergency alert to your mobile device

Get Monitored Fire Alarms As Part Of Your Bloomington Security System

To obtain the most from your monitored fire alarms, you'll need a state-of-the-art security system, like ADT. Lucky for you, Secure24 Alarm Systems can customize your ADT home security bundle to include fire and safety alarms. Just call (309) 316-6083 or send in the form below to begin.