How To Reset Your Security System In Bloomington
One perk of getting your security system set up by professionals is that you hardly ever have to worry about it. With that being said, there could be times where you have to reset your alarms in Bloomington. If you use the ADT Command panel, a reset normally requires just one or two taps of the touchscreen when you’ve experienced common events like false alarms and battery changes.
Check Your Instruction Manual Before Resetting Your Alarm
A word to the wise before you try to reset your Bloomington home security system, consult your instruction manual ahead of time. You’ll never want to compromise your home’s protection as a result of touching something incorrectly. In addition, control panels may change if you moved from a number pad to a fully digital system. And if you’re unable to figure out how to reset your system, don't worry as you can always contact the professionals.
Resetting Your Bloomington Security System Due To A False Alarm
Typically, a false alarm occurs due to an accidentally tripped sensor. You are able to utilize the central hub or open your ADT smartphone app and touch the shield image and type in your unique passcode to deactivate the alarms when this occurs. You may get a call from your 24-hour monitoring specialists, but simply inform them that you had a false alarm.
Tips To Reset Your Alarm When Experiencing A Power Outage In Bloomington
If the power goes out due to a storm or other event, you could start to hear a beeping sound from your alarm’s central interface. That indicates that the alarm is being powered by the backup battery. To reset your equipment and halt the constant chirping, you must take steps to disarm and rearm your security.
But please note, if power is out for an extended time, you may need a complete reset of your home’s security. Follow the directions in the instruction manual -- normally by submitting your PIN number and hitting the on/off button two times -- and you should be back in business. You may continue to notice the auxiliary power beeping, as it’s possible it won’t stop until the battery charges entirely. Call your security technician if you continue to have problems with your ADT system 20 hours after the power is resumed.
When You Need To Reset Your Home Security System After Replacing A Battery
On occasion you need to replace a battery powering one of your security devices. To do this, you will switch your system to test mode so you avoid triggering a false alarm. When the battery is replaced, change the alarm from Test Mode and resume normal operations. If the command center doesn't notice the device or the battery light is still on, you could have to perform a full reset of your security system.
Resetting Your Bloomington Security System When Adding Or Removing A Code
Removing or adding people can be accomplished on the ADT Command panel and the ADT Control mobile app. You won’t require a reset of your alarm when deleting or adding users. But you should note, if you relocate to a new property that already has an ADT system, you should reach out to your residential security experts at (309) 316-6083 to set up a new contract. The technician will go on site to upgrade components, place more devices (if necessary), and do a factory reset.
A Well-Designed Security System Can Be Yours Today
Attempting to reset a home security system in Bloomington will likely be difficult if it doesn’t have clear equipment and instructions. If you’re ready to find your intuitive alarm system, call (309) 316-6083 or complete the form below. We’ll be ready to customize the perfect security system for your residence.